|
DeFelsko STDP5 Certified Polystyrene Test Block Kits, Block 1: 1.5 - 60 mils, Block 2: 2.5 - 100 mils, Block 3: 6.5 - 250 mils, Block 4: 12 - 480 mils, for use with PosiTector 6000 FKS, NKS
Price: $ 195.00
Ideal for use in the calibration lab, in the field or on the factory floor
Certified coated metal plates and polystyrene blocks are ideal for verifying the accuracy and operation of coating thickness gages and are an important component in fulfilling both ISO and in-house quality control requirements. Many organizations require verification of gage accuracy at the test site each time a coating thickness gage is put into service and at frequent intervals during use. Ideal for this purpose, DeFelsko certified coating thickness standards have measured values traceable to a National Metrology Institution.
Features
- Used to verify the accuracy and operation of any Type 1 (mechanical) and Type 2 (electronic) magnetic, eddy-current or ultrasonic coating thickness gage
- Ideal for use in the calibration lab, in the field or on the factory floor
- Standards with steel or aluminum substrates consist of 4 plates mounted in a protective binder
- Polystyrene thickness standards consist of 4 blocks supplied in a rugged acrylic storage box
- Individually serialized for traceability to NIST or PTB - includes a Certificate of Calibration
- Certified and labeled in both Metric and Imperial units
- Accuracy: (2.5 m + 0.05% of thickness) | (0.1 mil + 0.05% of thickness)
Specifications
Order Code | Ideal for | STDP1
| PosiTector 6000FT, FTS, NTS, FNTS, FTRS PosiTector 200D | STDP2 | PosiTector 6000 FHS, FJS, NHS, EOC | STDP3 | PosiTector 100C | STDP4 | PosiTector 100D | STDP5 | PosiTector 6000FKS, NKS | STDP6 | PosiTector 200C | STDP7 | PosiTector 6000FHXS | STDP8 | PosiTector 6000FNGS, FLS |
Ordering Guide
Order Code | Approximate Thickness | Block 1 | Block 2 | Block 3 | Block 4 | STDP1
| 375 m 15 mils | 2 mm 80 mils | 4.5 mm 185 mils | 6.5 mm 250 mils | STDP2 | 2.5 mm 100 mils | 6.5 mm 250 mils | 13 mm 500 mils | 19 mm 750 mils | STDP3 | 375 m 15 mils | 1.5 mm 60 mils | 2.5 mm 100 mils | 4.5 mm 185 mils | STDP4 | 1.5 mm 60 mils | 2.5 mm 100 mils | 4.5 mm 185 mils | 6.5 mm 250 mils | STDP5 | 1.5 mm 60 mils | 2.5 mm 100 mils | 6.5 mm 250 mils | 12 mm 480 mils | STDP6 | 375 m 15 mils | 1.5 mm 60 mils | 2.5 mm 100 mils | 3 mm 125 mils | STDP7 | 1.5 mm 60 mils | 4.5 mm 185 mils | 6.5 mm 250 mils | 9.5 mm 375 mils | STDP8 | 13 mm 500 mils | 13 mm 500 mils | 13 mm 500 mils | 19 mm 750 mils |
All certified standards are supplied with a Certificate of Calibration traceable to NIST or PTB. P1-P7 Blocks: 38 x 70 mm (1.5" x 2.75") P8 Blocks: 76 x 76 mm (3.0" x 3.0")
Downloads
|
|
|