Micro-Metrics OG212-G Tooke Paint Inspection Gauge II Aluminum Body with 10x Cutting Tip & 2 Blank Tips



Price: $ 1,125.00

Micro-Metrics OG202 / OG212 Tooke Gauge II
Assists in measuring brittleness and adhesion of coatings and materials
Tooke Gages meet ASTM D4138-82 and ISO 2808


The OG212 Tooke Paint Inspection Gage is a precision tool for inspection and dry-film thickness measurement (in accordance with ASTM D4138) of single or multiple coats on any substrate, and for microscopic observation and measurement of substrate and film defects.


line
Kit Options
line

The machined aluminum Tooke Gage comes ready for use in a polycarbonate plastic carrying case with two spare batteries, a spare LED bulb, a indelible marking pen, a hex wrench, and a technical data sheet.

  • Standard cutting tip configuration is 1X, 2X, and 10X.
  • An optional 5X cutting tip is available.
  • Any configuration of tips may be requested (for example, three 10X tips; or a 1X, 2X, and 5X).

You may also order (for a lower price) a gauge with only a single cutting tip and two blank tips (spacers).

MaterialMachined anodized aluminum body
Overall dimensions4.5" x 3.5" x1" | 11.4cm x 8.9cm x 2.5cm
Microscope50-power, 45-degree, illuminated with Dual-Measure reticle
PowerTwo 15V AA drycells in the gauge, plus two spares
LampLED 222 bulb plus a spare bulb
Cutting tipsPrecision-ground tungsten-carbide cutting tips: 1X, 2X, and 10X(or as desired)
Shipping Weight~2 pounds (0.9 kg)


line
Features
line

  • Dual-Measure scope, with 1 mil per hashmark space above the line and 20 microns per hashmark space below the line scale.
  • Measures thickness of coatings applied to wood, plastic, cement, glass, ceramics, mirror backings, metal, etc.
  • Assists in measuring brittleness and adhesion of coatings and materials.
  • Both the OG212 and OG214 are supplied with 1, 2, and 10 cutting tips installed in the gauge body. An optional 5 cutting tip is available.
  • Gauges come in a rugged plastic carrying case with cutting tip wrench, indelible marker, spare LED bulb, and spare batteries

The gauge in standard configuration mounts 1X, 2X, and 10X cutting tips. (An optional 5X tip is available.) The gauge can be ordered in any desired configuration, such as with three tips of the same size. You may also order (for a lower price) a gauge with only a single cutting tip and two blank tips (spacers).

Direct measurement of total dry-film coating thickness and thickness of individual coats of paint is a unique capability of the Tooke Paint Inspection Gage. Thus, in addition to routine use, it often serves as a referee instrument to calibrate indirect or non-destructive thickness measuring instruments.

Note: Each microscope is validated before sale against a certified gage block traceable to the National Institute of Standards & Technology (NIST). An OEM calibration certificate is available for an additional fee


line
Applications
line

The Tooke Gage has been used to assess sandblast cleaning work, to measure plating and paint thickness on ceramics, metal, wood, and concrete, and even to measure protective backing thickness on mirrors. It is virtually the only tool for measuring paint on plastics. The quality of the incision in the film discloses much about the characteristics of the brittleness and adhesion of the material.

Other uses include assessment of substrate conditions and coating adhesion, and observation of microscopic cracking, tendency for brittleness, cratering, or other microscopic film symptoms.


line
Construction
line

The aluminum gauge body contains an illuminated microscope and mounts three tungsten-carbide cutting tips (that incise the V-groove for measuring) on the narrow side. Two guide studs project from the body on the same side as the cutting tips. The tripod thus formed by the three legs (guide studs and cutting tip) provides precise alignment of the tool with the surface to be grooved. A lanyard with keeper looped through the body secures the instrument to the inspectors wrist. The entire unit is designed for convenience and completeness in field inspection tasks.

The aluminum gauge body contains an illuminated microscope and mounts three tungsten-carbide cutting tips (that incise the V-groove for measuring) on the narrow side. Two guide studs project from the body on the same side as the cutting tips. The tripod thus formed by the three legs (guide studs and cutting tip) provides precise alignment of the tool with the surface to be grooved. A lanyard with keeper looped through the body secures the instrument to the inspectors wrist. The entire unit is designed for convenience and completeness in field inspection tasks.


line
Operation
line

A special cutting tool (the cutting tip) that is integral to the gauge is used to incise a small precision V-groove through the paint film and into the substrate.

Ensure the operable tip and both guide studs are in solid contact when incising the V-groove with the anodized OG212 Tooke Gage
Incorrectly incising the V-groove with the anodized OG212 Tooke Gage. Notice the closer guide stud is not touching the surface.
Tooke Gage cutting tips are precision-ground from tungsten-carbide blanks.

The gauge in standard configuration mounts 1X, 2X, and 10X cutting tips. (An optional 5X tip is available.) The gauge can be ordered in any desired configuration, such as with three tips of the same size. You may also order (for a lower price) a gauge with only a single cutting tip and two blank tips (spacers).

Diagram of cutting tip incisions
The tip slot is marked for the standard tip arrangement (in the anodized body)
Close-up of the 1X tip extended for use and two blank tips; mounted in a (very) old-style gauge body


line
Principle: using the Dual-Measure microscope
line

Measurement with a Tooke Gage is a function of the cutting tip face-angle and NOT of the microscope.

One of the best things about the new Dual-Measure scopes is the return to an easy calculation system related to the cutting tip face-angle. As described in the measuring demo, and shown in the drawings in the Geometry section, below, count the hashmarks spaces for each layer of coating, and then calculate the coating depth using the the Dual-Measure scope conversion shown below.

Conversion for the Dual-Measure scope:

Cutting tip used:Face RatioEach counted hash measures:
1X1 : 11 mil
2X1 : 21/2 mil
10X1 : 101/10 mil
View through the new Dual-Measure reticle: the metric scale is marked in 20m per hashmark.
The discontinued universal microscope reticle is marked in 50m per hash. For universal scope conversions, see the Reticles section below.


line
The geometry of the Tooke Gage incision
line

The easiest example of the process is demonstrated using the 1X cutting tip. In essence, you are cutting a triangle into your coating by incising the hypotenuse of a right-angle triangle. With the 45 precision-ground face of the 1X tip, youre cutting an equi-lateral triangle: 1X tip has a 1 : 1 ratio. (See the 1X tip drawing below.) That is, by counting the hashmarks that define the horizontal triangle-side at the bottom of the triangle (and your view through the microscope), you are measuring across the cut-width. The 1:1 ratio means your cut-width equals that is your coating depth. With the 10X tip, youre drawing a right-angle triangle, and one-tenth (1/10) the number of hashmarks across the cut-width is your coating depth. (See 10X figure below.)

Cutting tip diagram and ratio of cut-width : coating-depth

An interim measuring demonstration
This demonstration, using pictures through the no-longer available universal scope shows the process. A demonstration using the Dual-Measure reticle will be posted soon.

Note that in the photo below, the zero-line of the reticle is not lined up for the actual measurement (nor does it need to be; any hashmark will do). The gray/silver-colored line is the metal substrate; the white line is the (inside of the) green coating, which is what is measured visually through the scope. (See below for a different annotated version.) The cutting tip draws the (specifically-angled, depending on the chosen tip face) incision, which allows for calculation of the coating thickness. In this photo, the black marker has not been used to make the edge (top) of the green coating more easily seen.

The view through the universal microscope

In the next photo, the zero-line of the reticle is not lined up with the edge of the primer coating (the white line to the left of the zero-line); it is approximately centered in the substrate (gray/silver line). (This was not intentional; lining up the camera moved the gauge slightly.* Nor does it need to be lined up; any hashmark will do.) Line A is on the edge between the substrate and the beginning of the primer-coating: begin your measurement there. Line B marks the top of the primer coating/beginning of the top coating (light blue). Line C is the incision into the top coating, made easier to see by using the black marker provided with the Tooke Gage. (* The next major Micro-Metrics project after the Dual-Measure scopes is a camera adapter! Stay tuned!)

Annotated close-up through universal scope

Thus, in this photo and using the discontinued universal scope with 50m per hashmark space, the thickness measured for each tip equals:

1 X tipwhite primer2 reticle / hashmark spaces100m
blue topcoat5 reticle / hashmark spaces250m
2X tipwhite primer2 reticle / hashmark spaces50m
blue topcoat5 reticle / hashmark spaces125m
10X tipwhite primer2 reticle / hashmark spaces10m
blue topcoat5 reticle / hashmark spaces25m

If you have an older gauge, with an English-only or metric-only reticle, please see this page for the measurements that would apply to this incision. These old-style scopes have a green-anodized barrel. The old-style scope is no longer available More information about this gauge is posted at that link.


line
Replacement tungsten-carbide cutting tips
line

Available in 1X (45), 2X (26 6') and 10X (5 7') configurations. An optional 5X tip (11 18') and blank unfaced tips are also available. (The blank tips provides lateral stability for the operable tip, if only one faced tip is used.)


line
Related Products
line

Micro-Metrics CTH01 Cutting Tip Holder

  • The Cutting Tip Holder, at a little under two inches long, allows easy use of a cutting tip without having to manipulate the Tooke Paint Inspection Gage to make the incision and then manipulate the gauge again to view the incision through the microscope.
related

line

Micro-Metrics CTH02 Cutting Tip Holder

  • The CTH02 (two-tip) Cutting Tip Holder allows easy use of carbide cutting tips without having to manipulate the Tooke Paint Inspection Gage to make the incision and then manipulate the gauge again to view the incision through the microscope.
related


line
Downloads
line

Micro-Metrics OG202 / OG212 Tooke Paint Inspection Gauge II - Data Sheet
Micro-Metrics OG202 / OG212 Tooke Paint Inspection Gauge II - Dual-Measure Scope Swap Program

Order Online
Check the items you would like to order then click "Add To Cart". Items typically ship within 1 Week
Product Price
Micro-Metrics OG212-G Tooke Paint Inspection Gauge II Aluminum Body with 10x Cutting Tip & 2 Blank Tips $1,125.00
Accessories Price
OG200-1X Carbide Cutting Tip, 1x $82.00
OG200-2X Carbide Cutting Tip, 2x $82.00
OG200-10X Carbide Cutting Tip, 10x $82.00
OG200-5X Carbide Cutting Tip, 5x $82.00
CTH01 Cutting Tip Holder, Single-Tip (tips sold separately) $65.00
CTH02 Cutting Tip Holder, Two-Tip (tips sold separately) $75.00

 



 
 

Powered by Marctin Web Architecture